Unverified50% confidenceFactExact time
The build plate is the platform on a 3D printer that carries the first layer of printing; adhesion between the print and the bed surface must be strong enough to prevent warping but not so strong that removal is difficult.
1
Sources
50%
Confidence
Long-term
Relevance
10/21/2026
First Seen
Sources
Related Entities
Related Claims
UnverifiedThe kinematic coupling solution has relatively high requirements for the precision and rigidity of 3D-printed parts, and it is recommended to use metal parts or harder engineering plastics (such as nylon or PC) for critical mating surfaces.69% similarUnverifiedAll parts of Decky except the display are 3D printed, and every component can be printed without supports.69% similarUnverifiedThe adaptability of 3D printing for accessible assistive devices lies in three aspects: low customization cost, rapid iteration, and distributed production.68% similarUnverified3D-printed parts have problems such as interlayer strength, surface roughness and material safety, and when used for pet products, characteristics such as being non-toxic, bite-resistant and not easily broken must be considered.68% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/1080089API
curl https://kongchang.com/api/v1/knowledge/claims/1080089MCP
get_claim(id=1080089)