Factory IO
A 3D industrial simulation software that communicates with PLCs through driver interfaces. It is used to simulate the control logic of real production lines and to support joint debugging of control systems.
Timeline (last 90 days)
Factory IO is a 3D industrial simulation software that can establish communication with the PLC through a driver interface.
The FC9000 block is a special function block in Siemens TIA Portal used for data exchange with the Factory IO simulation software, internally encapsulating address mapping and communication protocol handling logic.
In joint debugging of TIA Portal and Factory IO, a project template containing the FC9000 block must be used, otherwise the PLC program cannot establish communication with Factory IO.
The Factory IO Running simulation switch is usually mapped to PLC input point I1.5 to control simulation start and stop in the Factory IO interface, and the PLC determines whether the simulation is in running mode by reading this signal.
The PLC's I/O addresses must strictly match the configuration in the Factory IO driver, otherwise the control signals cannot be transmitted correctly.
When the Factory IO simulation connection fails, running the Factory IO software as administrator can resolve some system permission issues.
All Facts (6)
Factory IO is a 3D industrial simulation software that can establish communication with the PLC through a driver interface.
50%UnverifiedThe FC9000 block is a special function block in Siemens TIA Portal used for data exchange with the Factory IO simulation software, internally encapsulating address mapping and communication protocol handling logic.
50%UnverifiedIn joint debugging of TIA Portal and Factory IO, a project template containing the FC9000 block must be used, otherwise the PLC program cannot establish communication with Factory IO.
50%UnverifiedThe Factory IO Running simulation switch is usually mapped to PLC input point I1.5 to control simulation start and stop in the Factory IO interface, and the PLC determines whether the simulation is in running mode by reading this signal.
50%UnverifiedThe PLC's I/O addresses must strictly match the configuration in the Factory IO driver, otherwise the control signals cannot be transmitted correctly.
50%UnverifiedWhen the Factory IO simulation connection fails, running the Factory IO software as administrator can resolve some system permission issues.
50%