Glass Fiber PETG
A reinforced 3D printing filament made by mixing chopped glass fibers into PETG, improving rigidity, heat resistance and dimensional stability while accelerating nozzle wear.
Timeline (last 90 days)
The spacer block was printed in glass-fiber PETG, using about 300 grams of filament, with a material cost of roughly 5 to 6 US dollars.
Glass-fiber PETG is a reinforced filament made by mixing chopped glass fibers into ordinary PETG; it improves rigidity, heat resistance and dimensional stability, but accelerates nozzle wear, so wear-resistant hotends such as hardened steel or ruby are recommended, and printing temperatures typically need to be around 250-260°C.
All Facts (2)
The spacer block was printed in glass-fiber PETG, using about 300 grams of filament, with a material cost of roughly 5 to 6 US dollars.
50%UnverifiedGlass-fiber PETG is a reinforced filament made by mixing chopped glass fibers into ordinary PETG; it improves rigidity, heat resistance and dimensional stability, but accelerates nozzle wear, so wear-resistant hotends such as hardened steel or ruby are recommended, and printing temperatures typically need to be around 250-260°C.
50%